How many pixels do I need to print 4×6 in?
4×6 in (10.2×15.2 cm) needs 1200×1800 pixels (2.2 MP) for 300 PPI (Excellent), or 800×1200 (1.0 MP) for 200 PPI (Good). Enter your photo below to see how it fits.
Drop a photo to read its size
Your photo never leaves your browser. Only its width and height are read.
| PPI | Rating | Crop | Viewing distance | PPI needed |
|---|
Ratings: Excellent 300+ PPI · Good 200–299 · Fair 150–199 · Poor under 150. Viewing distance is 1.5 × the print diagonal; the PPI needed there uses the 1-arcminute rule of thumb, so treat it as a guideline. Some print labs ask for 240+ PPI, so check yours.
4×6 in print questions
How many pixels do I need to print 4×6 in?
For 300 PPI you need 1200×1800 (2.2 MP). 240 PPI (what some labs ask for) needs 960×1440 (1.4 MP), 200 PPI 800×1200 (1.0 MP) and 150 PPI 600×900 (0.5 MP).
How many megapixels do I need to print 4×6 in?
About 2.2 MP for 300 PPI and 1.0 MP for 200 PPI, if the photo already matches the print's ratio. A different ratio needs a little more, because the extra is cropped.
Is a 12 MP, 24 MP or 48 MP photo enough for 4×6 in?
A 12 MP photo (4:3, 4000×3000) prints at 667 PPI (Excellent) with 11.1% cropped; a 24 MP photo (3:2, 6000×4000) prints at 1000 PPI (Excellent) with 0% cropped; a 48 MP photo (4:3, 8000×6000) prints at 1333 PPI (Excellent) with 11.1% cropped.
How far away should I view 4×6 in prints?
About 11 in (27 cm), which is 1.5 × the print's diagonal. At that distance roughly 318 PPI is enough, though this is a rule of thumb, not a guarantee.