How big can I print a 48 MP photo?

A 48 MP photo at a 4:3 ratio is about 8000×6000 pixels. At 300 PPI (Excellent) that prints at 26.7×20.0 in (67.7×50.8 cm). At 200 PPI (Good) it reaches 40.0×30.0 in (101.6×76.2 cm), and at 150 PPI (Fair) 53.3×40.0 in (135.5×101.6 cm).

Of the standard US print sizes, the largest that still rates Excellent is 18×24 in (333 PPI, 0% cropped). The largest rated Good or better is 24×36 in (222 PPI, 11.1% cropped).

These numbers assume a 4:3 sensor. If yours differs, change the ratio in the calculator above.

Jump to the FAQ ↓

Units

Drop a photo to read its size

Your photo never leaves your browser. Only its width and height are read.

Largest print at each PPI

PrintPPIRatingCropViewing distancePPI needed

Ratings: Excellent 300+ PPI · Good 200–299 · Fair 150–199 · Poor under 150. Viewing distance is 1.5 × the print diagonal; the PPI needed there uses the 1-arcminute rule of thumb, so treat it as a guideline. Some print labs ask for 240+ PPI, so check yours.

FAQ

48 MP print questions

What PPI does a 48 MP photo give at 4×6, 5×7 and 11×14?

At 4:3 (8000×6000), it gives 1333 PPI at 4×6 in (Excellent), 1143 PPI at 5×7 in (Excellent) and 545 PPI at 11×14 in (Excellent).

Is 48 MP enough for an 8×10, 16×20 or 24×36 print?

At 4:3 (8000×6000), a 48 MP photo gives 750 PPI at 8×10 in (Excellent), 375 PPI at 16×20 in (Excellent) and 222 PPI at 24×36 in (Good). A print ratio that differs from the photo is cropped to fit.

What PPI should I print a 48 MP photo at?

Excellent is 300+ PPI, Good 200–299, Fair 150–199 and Poor under 150. For this photo, 300 PPI gives up to 26.7×20.0 in (67.7×50.8 cm), 240 PPI (what some labs ask for) 33.3×25.0 in (84.7×63.5 cm) and 200 PPI 40.0×30.0 in (101.6×76.2 cm). Check your lab's minimum.

How many pixels is 48 MP?

It depends on the ratio: at 3:2 it is about 8485×5657, at 4:3 it is about 8000×6000, at 16:9 it is about 9238×5196, at 1:1 it is about 6928×6928.

Made this with AI? Find the best generation size. AI image size →